FTRJ-131X-10I系列:单模1310 nm双纤LC接口 工业级
产品特点
产品应用:
操作极限参数
参数 |
符号 |
最小值 |
典范值 |
最大值 |
单位 |
存储温度 |
TS |
-55 |
100 |
°C |
|
供电电压 |
VCC |
-0.5 |
3.6 |
V |
|
事情湿度 |
- |
95 |
% |
注:若是操作历程凌驾上述值,可能会对?樵斐晌薹ɑ指吹乃鸹
正常事情参数
参数 |
符号 |
最小值 |
典范值 |
最大值 |
单位 |
事情温度 |
TC |
-40 |
85 |
°C |
|
供电电压 |
VCC |
3.13 |
3.3 |
3.465 |
V |
事情速率 |
1 |
10 |
10.3 |
Gbps |
电口参数
参数 |
符号 |
最小值 |
典范值 |
最大值 |
单位 |
|
发送端 |
||||||
输入电平CML(差分,AC耦合) |
Vin |
180 |
700 |
mVpp |
||
输入AC耦合的共模电压 |
0 |
25 |
mV |
|||
输入阻抗(差分) |
Zin |
85 |
100 |
115 |
ohms |
|
TX_DIS |
Disable |
2 |
Vcc+0.3 |
V |
||
Enable |
0 |
0.8 |
||||
吸收端 |
||||||
输出电平CML(差分,AC耦合) |
Vout |
300 |
850 |
mVpp |
||
输出AC耦合共模电压 |
0 |
15 |
mV |
|||
输出阻抗(差分) |
Zout |
85 |
100 |
115 |
ohms |
|
SD信号输出高 |
2 |
VCC+0.3 |
V |
|||
SD信号输出低 |
0 |
0.8 |
V |
光口参数
参数 |
符号 |
最小值 |
典范值 |
最大值 |
单位 |
速率 |
10 |
Gbps |
|||
发送端 |
|||||
平均输出光功率 |
P0 |
-6 |
0 |
dBm |
|
波长 |
λC |
1260 |
1310 |
1355 |
nm |
光谱宽度(RMS) |
?λ |
1 |
nm |
||
消光比 |
ER |
3.5 |
dB |
||
边模抑制比 |
SMSR |
30 |
dB |
||
吸收端 |
|||||
吸收波长 |
λC |
1260 |
1565 |
nm |
|
吸收迅速度 |
Pmin |
-14 |
dBm |
||
过载光功率 |
Pmax |
0.5 |
dBm |
||
SD信号扫除告警 |
SDD |
-30 |
dBm |
||
SD信号插入告警 |
SDA |
-14 |
dBm |
||
光回拨消耗 |
ORL |
-12 |
dB |
注:VCCTX=3.3V,事情温度TA=全温规模
管脚号 |
符号 |
形貌 |
GP |
GP |
接地管脚,毗连到机壳地 |
1 |
TD+ |
发射端数据输入正 |
2 |
VEETX |
发射信号地 |
3 |
TD- |
发射端数据输入负 |
4 |
VCCTX |
发射端电源 |
5 |
SD(LVTTL) |
无光告警输出:正常收光时输出逻辑“1” 收光异常时输出逻辑“0” |
6 |
TDIS(LVTTL) |
发射端禁用输入:逻辑“1”=禁用光输出; 逻辑“0”=使能光输出。 内部4.7K电阻上拉,默认榨取光输出。 |
7 |
RD+ |
吸收数据输出正 |
8 |
VCCRX |
吸收端电源 |
9 |
RD- |
吸收数据输出负 |
10 |
VEERX |
吸收信号地 |
11 |
SCL |
I2C时钟线 |
12 |
SDA |
I2C地点线 |
注:TDIS信号为高电平有用,若不使用TX_DISABLE功效,应将TDIS引脚下拉至地,坚持该引脚为低电平,不可悬浮,不然会导致?槭虑椴徽。
EEPROM:
?榈腎2C通讯方法、寄存器界说完全凭证协议SFF-8472 Rev10.2
通过I2C可以读出?榈脑谖蛔刺畔ⅲ何露取⒌缪埂⒗孽夤β省⑹斩斯夤β省⑵玫缌鳎˙ias)。
水 在位状态信息地点 |
|||
Address |
Bytes |
Name of filed |
Description |
96-97 |
2 |
Temperature (MSB, LSB) |
Internally measured module temperature |
98-99 |
2 |
Supply Voltage (MSB, LSB) |
Internally measured supply voltage in module |
100-101 |
2 |
TX Bias Current (MSB, LSB) |
Internally measured TX Bias current |
102-103 |
2 |
TX Optical Power (MSB, LSB) |
Internally measured TX Optical Power |
104-105 |
2 |
RX Received Power (MSB, LSB) LSB) |
Measured RX input Optical power |
106-109 |
4 |
Reserved |
Regulatory Compliance
F-tone Networksoptic transceiver is designed to be Class I Laser safety compliant and is certified per the following standards
Feature |
Agency |
Standard |
Laser Safety |
FDA |
CDRH 21 CFR 1040 annd Laser Notice No. 50 |
Product Safety |
BST |
EN 60825-1:2007 EN 60825-2:2004 EN 60950-1:2006 |
Environmental protection |
SGS |
RoHS Directive 2002/95/EC |
EMC |
CCIC |
EN 55022:2006+A1:2007 EN 55024:1998+A1:2001+A2:2003 |
Ordering information
Part Number |
Product Description |
FTRJ-131X-10 |
1G~10.3125Gbps RJ Optical Transceiver 10km, 1310nm,0?C ~ +70?C |
FTRJ-131X-10I |
1G~10.3125Gbps RJ Optical Transceiver 10km, 1310nm, -40?C ~ +85?C |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-tone Networks before they become applicable to any particular order orcontract. In accordance with the F-tone Networks policy of continuous improvement specifications may changewithout notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.