100G CFP Optical Transceiver Module (FTC1-HG-SR10xx/FTC1-HG-CSR10xx)

Description
The CFP optical transceiver module are a high performance, low power consumption, short reach(1m to 100m) interconnect solution supporting 100G Ethernet and Telecom. It is compliant with the CFP MSA and IEEE P802.3ba 100GBASE-SR10.

100G CFP2 to QSFP28 Adapter

Description
The 100G CFP2 to QSFP28 Adapter module is a four-Channel, high performance, hot pluggable, and interconnect solution supporting 100G Ethernet and Telecom. The adapter converts a CFP MSA interface to 1-port of 100GE QSFP28.It is compliant with the CFP MSA.

100G CLR4 2km QSFP28 Optical Transceiver

Description
This product is a 100Gb/s transceiver module designed for optical communication applications compliant with the QSFP MSA,CLR4 MSA and portions of IEEE P802.3bm standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of CWDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission.

100G QSFP28 eER4 Optical Transceiver Module

Description
This product is a 100Gbps transceiver module designed for optical communication applications compliant to 100GBASE-ER4. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. 

100G QSFP28 ZR4 Optical Transceiver Module

Description
This product is a 100Gbps transceiver module designed for optical communication applications compliant to 100GBASE-ZR4. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. 

100G-DR1 QSFP28 光？

产品形貌
F-tone Networks的100G DR1 500米QSFP28光？，100G QSFP28 DR1（FTQ2-HG-DR1xx）设计用于单模光纤（SMF）上500米以内的100千兆以太网链路。它切合QSFP28 MSA、802.3cu 100GBASE DR1和CAUI-4（无FEC）1。数字诊断功效可通过I2C接口获得，如QSFP28 MSA所划定。

100G-ER1-40km QSFP28光？

产品形貌
F-tone Networks 100G ER1-40km QSFP28光？，100G QSFP28 ER1-40（FTQ2-HG-ER1xx）设计用于单模光纤（SMF）上长达40km的100千兆以太网链路。它切合QSFP28 MSA、100G Lambda 100G ER1-40和CAUI-4（无FEC）1。数字诊断功效可通过I2C接口获得，如QSFP28 MSA所划定。

100G-FR1 QSFP28光？

产品形貌
F-tone Networks 100G R1-2km QSFP28光？，100G QSFP28 FR1（FTQ2-HG-FR1xx）设计用于单模光纤（SMF）上长达2km的100千兆以太网链路。它切合QSFP28 MSA、802.3cu 100GBASE-FR1和CAUI-4（无FEC）1。数字诊断功效可通过I2C接口获得，如QSFP28 MSA所划定。

100Gb/s QSFP28 PSM4 2km Optical Transceiver Module

Description
The F-tone Networks FTQ2-HG-PSMIR4xx is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP 28 PSM4 for 100 or 40 Gigabit Ethernet , Infiniband DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. 

100GBASE QSFP28 CWDM4 10KM Optical Transceiver Module

Description
This product is a 100Gb/s transceiver module designed for optical communication applications compliant with the QSFP MSA,CWDM4 MSA,100G 4WDM4-10 MSA and portions of IEEE P802.3bm standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of CWDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission.

100GBASE-CWDM4 QSFP28 Optical Transceiver Module

Description
This product is a 100Gb/s transceiver module designed for optical communication applications compliant to 100GBASE-CWDM4 of the IEEE 802.3bm standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of CWDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. 

100GBASE-ER4 CFP2 40km Optical Transceiver (FTC2-HG-ER4xx)

Description
The F-tone Networks CFP2 100GEBASE-ER4 optical transceiver is a hot pluggable 100Gbps small-form-factor transceiver module. It is designed for use in 100 Gigabit Ethernet links and 4x28G OTN client interfaces over single mode fiber. 

100GBASE-LR4 CFP 10kmOptical Transceiver (FTC1-HG-LR4xx)

Description
The F-tone Networks 100GBASE-LR4 CFP module is the CFP optical transceiver which is a hot pluggable form factor designed for high speed optical networking application. The module is designed for 100Gigabit Ethernet application and provides 100GBASE-LR4 compliant optical interface, CAUI electrical interface and MDIO module managementinterface. 

100GBASE-LR4 CFP2 10km Optical Receiver

Description
The F-tone Networks CFP2 100GEBASE-LR4 optical Receiver is a hot pluggable 100Gbps small-form-factor transceiver module .It is compliant with IEEE802.3ba and CFP MSA. The module is a multi-rate optical transceiver and intended to support Telecom and Datacom applications.

100GBASE-LR4 CFP4 10km Optical Transceiver

Description
The F-tone Networks CFP4 100GEBASE-LR4 optical transceiver is a hot pluggable 100Gbps small-form-factor transceiver module. It is designed for use in 100 Gigabit Ethernet links and 4x28G OTN client interfaces over single mode fiber. It is compliant with the CFP MSA, IEEE 802.3ba 100GBASE LR4 and OTU4 4I1-9D1F.

100GBASE-LR4 QSFP28 Optical Receiver Module

Description
This product is a 100Gb/s receiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard and ONT OUT4. The receiver module de-multiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data.

100GBASE-SR10 CFP2 Optical Transceiver Module

Description
The CFP2 optical transceiver module are a high performance, low power consumption, short reach interconnect solution supporting 100G Ethernet and Telecom. It is compliant with the CFP2 MSA and IEEE P802.3ba 100GBASE-SR10. F-tone Networks CFP2 SR10 modules offer 10 transmit and 10 receive asynchronous channels operating at up to 11.18Gbps per channel.

100GBASE-SR4 QSFP28 Active Optical Cable (FTQ2-HG-SR4-Q2-Oxxx LOW POWER Version)

Description
The F-tone Networks Technologies FTQ2-HG-SR4-Q2-Oxxx is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ SR4 for 100 or 40 Gigabit Ethernet , Infiniband FDR/EDR Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications.

100GBASE-SR4 QSFP28 to 2x QSFP28 Active Optical Cable

Description
F-tone Networks QSFP28 to 2 x QSFP28 breakout Active Optical Cable is a Four-Channel, Parallel, Fiber-Optic QSFP28 SR4 for 100 or 40 Gigabit Ethernet , Infiniband FDR/EDR and 32GFC Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications.