400G 2km OSFP Optical Transceiver
Product Description
F-tone Networks’s OSFP transceiver module is designed for use in 400 Gigabit Ethernet links over 2Km single mode fiber. The module has 8 independent electrical input/output channels operating up to 53.125Gbps per channel.This transceiver consists of two transmitter/receiver units, with each operating on a set of 4 wavelengths on the ITU G.694.2 CWDM grid near 1300nm. The transmitter path of the module incorporates a bi-directional PAM4 re-timer ASIC integrated with an 8-channel modulator driver, 8 externally modulated lasers and two optical multiplexers. On the receiver path, two optical de-multiplexers are coupled to 8 photodiodes and two 4-channel TIA arrays, along with the PAM4 re-timer. The electrical interface of the module is compliant with the 400GAUI-8 interface as defined by IEEE 802.3bs, and compliant with OSFP MSA.
Features
● Supports 425Gbps
● Single 3.3V Power Supply
● Up to 2km over SMF with KP4 FEC supported at the Host side
● Dual SMF CS connector
● Triple Rate operation:53.125Gbps (PAM4), 25.78125Gbps (NRZ)
● OSFP MSA compliant
● Cooled EML CWDM transmitter
● PIN and TIA array on the receiver side
● Power dissipation < 12W
● Case temperature range: 0°C to 70°C(commercial)
● Safety Certification: TUV/UL/FDA
● RoHS Compliant
Applications
● 2x200G DC applications
● 200GBase-FR4
本产品为FT-AM系列,仅展示部分参数,若有需要,请联系尊龙在线登录。
注:本产品有天下产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.